This Pump Noobs needs help

[Koa]

yeah, try a higher psi, unless your gun is farting, then a lower psi

what springs you got in it?


and for the leak, sounds like you might need a higher psi or a new valve oring or new cup seal or polish out a valve burr and lap the cup seal to the valve

[Crazyeyez]

Its not farting and i think its running at close to 400 to 425.  450 being max for Hyper 2

Stock Springs

I dont think i ever cleaned out of opened up the valves on this gun.
I think i need to buy valve removal tool..dang it
So how can i get more shots per HPA tank? My target would be 200 to 250 shots

I did more reading and see ppl recommand new springs so i bought MADDMAN Spring kit and Valve removal tool.  Any suggestions which i should start with? 

[Koa]

i would recommend NOT using the maddman spring kit

hahahahahahahahaha
and you want 200-250
use a phantom then

or if you still want to use a sheridan valve, i wouldnt use a reg, and devolumize the air chamber and find an old stock valve, and use red valve and green man, or blue to get fps

[madmike]

try pump gun before you air it up..

[Koa]

try pump gun before you air it up..

try making smarter post

[madmike]

ok well i read that it was leaking out of the barrel right .. my gun was leaking out of the barrel as well and i figured out that if i pumped it before airing it up it stopped ..so im just trying to help man

[Koa]

thats not a leak, thats venting due to too low of a PSI