New Designz Thread Saver On-off (NDZ TSO) Review

[Koa]

i just got mine in the mail and all i can say is.........ITS TEH SHIT!

probably one of the most ingenious ideas ever for paintball tanks!!!!!
its makes any screw in tank you got an on off tank, much like the Centerflag 420 Slide Valve, but much cheeper and portable on any tank

from the pics here
http://www.pbnation.com/showthread.php?t=2619962
you can see that the dial pushes a rod down which is connected to a pin in the TSO which pushes tank's pin valve open

this thing is perfect for:

• players who want to not buy an expensive on off bottomline ASA but still have on off capabilites
• players using 13, 48 or 72 ci tanks and need extra length  (the length on gun 1.260(from back of ASA to front of the dial) and total length 2.063 inches)
• invert mini, SL-68(I&II), ie any gun with a built in bottomline ASA
• myth reg owners with gauges that hit the grip frame

just make sure the dial is not screwed down when you screw the TSO either into your ASA or onto your tank and screw the tank into the gun, and just screw the dial toward the tank and it airs up, then when your done just screw it back out and it de-pressurizes.  i still need to test it with prolonged use to see if any orings cut, but so far im just uber impressed, since i was unable to purchase a 420 SV, and im a lover of Duckbills

vid to come

[dabe]

True-that Koa!
I had the privilege to actually see it today!
Great investment to have!
Smooth action and works like a charm!
I'm planning on picking one up myself!

Here's the link:  http://www.newdesignz.com/Misc_5.htm 

[Koa]

Frank is bringing them in!

here is link from NDZz new site
http://www.ndzpb.com/index.cfm?fuseaction=catalog.prodInfo&productID=263&categoryID=5

[hawaiianking]

i just got one of these in the mail it works as advertised



this thing is similar to the ndz.  it does not have a built in on/off but it has internals that allow it to work with existing on/offs.

i like this cause i already have an on/off and i did not want two in a row.  the main reason i bought this is because i have some myth regs that hit my grip frame.  these are a little cheaper ~$25.

this product it shorter than the ndz.  they come in to sizes. 

"The short version increases the setup length by 21.5mm (0.85"), while the long version increases the setup by 28mm (1.1")."
(from MacDev web site)
http://www.macdev.net/reg%20extenders.html

[Koa]

oh NDZ makes those as well
http://www.ndzpb.com/index.cfm?fuseaction=catalog.prodInfo&productID=265&categoryID=3

[hawaiianking]

damn those are cheaper.  do they have the internal parts to work with an on/off??

[Koa]

no its just has a screw to push it down

do the Mac Devs have a parts to use with on offs?
hummmmm then i might want one

[hawaiianking]

yep they have a floating piece that is used to push the pin in when you screw down on your on/off.

[Koa]

oh man then i might pick one up, perfect!
well i need an on off asa first