Project Almost Done (Jackal Halfd Minid Midgetd Pump MQ2)

[hawaiianking]

Here's my project gun.  Its almost done. Gonna machine the back of the body to match the curve in the frame, then off to anno.  Open to any ideas, please refrain from flaming. Thanks for looking.:devil:





Specs:
Jackal RDL Mini Body (Halfblocked and Migdeted)
JCM Halfblock Sled, Bolt
CCM Mini Pump Kit (Shortened and Lightened)
CCM S6 Pump Plate
CCM Feedneck
CP Regulator
CP Detent
CCI Phantom Return Spring (1/2 Rate)
06 Ego Star Frame (Machined to Match)
06 Ego Maniac Board (might switch to E2 board)
MTX MQ2 Poppet
PBX MQ1 Solenoid
Bob Long Gauge
Bob Long ASA
Deadly Wind Fibur Barrel
Custom Pump Handle
Custom Grips (CNC to come)
Impulse Pin

Setup:
Moded Winchester Hopper
13/3000 Tank w/Air Guerrilla Myth Reg

NEW PICS



Cut the rear section to match the curves of the frame.  Also wanted to get rid of the "ackal" engraving after I migdeted the "J" off.  Gonna do some filing to get a compound curve to match a little better.  Shows off the MQ2 inside.  Decided to use the MQ2 solenoid cause it was shorter.  Cut the IVG shorter ~1.5 threads left.  Also put in a new pin thanks to nostayhome. 

Next step design some CNC grips.

PS the short barrel again shows how much shorter the handle is compared to other handles.

More Pics Later. Thanks for looking.

[Koa]

hey is that threads on the mq noid?

[hawaiianking]

no just reflections cause its so shiny.

[Koa]

+15 internets!!!!!!

[drg]

I noticed above you said you might switch to E2 board, any reason?

[Koa]

yeah whats the dwell times and the psi you running at?

[elweer]

badass!

[hawaiianking]

the dwell is 4 ms the pressure is pretty much the same as the mq1 ~320 = 300fps.

the board works.  i think the board i have has some issues with or without the mq.  it tends to not wanna turn on, i have to remove the battery then hold the on button and reinsert the battery and she goes.  when i go out to play i set the autooff to 60 mins so it doesnt shut off and not come back on.  the lcd screen also tends to glitch.  i think the e2 is just more reliable.

[Faze_oUt]

Nice.....