Mq on sf board

[xicano]

I am planning to build a mq trilogy select fire pump. With a stock board running a mq valve but I am not sure if the board will work with that valve. Has anyone had any experience with this and if so can you please help me with my question. Hint hint Koa.

[Koa]

it should work, just remove the hammer sear(or leave it in to slow down the cycle for Cdel if theres room)

so you just need to splice wires for the MQ

[drg]

I don't know if anyone's ever tried that particular board. It might work, but it might honestly be more worthwhile to look into an eblade+t-board option. Sometimes you can find bare frames cheap, or if you get really desperate, you can try find a normal SF frame, people practically give those away, and those can be modified to take a t-board. The trilogy itself isn't a bad basis gun, but you probably won't get anything for the parts you don't use, vs. a normal cocker base, where you might be able to get a few bucks back for the parts.